Megamixers

Screw Spray Pumps

These screw pumps will pump a large range of materials from thin coat renders to high build masonry coatings. They are also used for pumping and injecting grouts and pointing mortars. They have a stainless steel hopper which is easy to clean and are produced in the UK

STX410 Screw Pump


The STX410 is a mini screw pump that will spray finish plasters, thin coat and external wall coatings, fireproofing and intumescent paints
The 110v pump will work off a standard domestic supply and 3kva transformer and is for plaster work in domestic building and internal refurbishment
The pump is fitted with a 2" diameter stator
The screw pump uses the mono pump principle, with a rotor and rubber stator to pump and spray heavy bodied coatings, finish plasters and waterproofing render, fireproofing and textured paints and cement coatings

 

APPLICATIONS

• for spraying & applying
• thin coat & acrylic renders
• spray application of cements
• fireproofing & intumescent paints
• waterproofing renders & tanking
• textured & high build masonry coatings
• finish plasters & coatings
• pumping & injecting grouts & pointing mortars

Specifications

  • STX410 Spray Pump 0.75kw
  • Hopper tank 30 ltr
  • Pump output 4 ltr
  • Height 75cm
  • Air required for gun 280 ltr/min @ 4 bar

Download PDF from catalogue

BUY STX410 SPRAY PUMP ONLINE


STX515S, STX515T & Screw Spray Pump

UPDATED PRODUCT & NEW THREE SPEED VERSION


The STX515 pumps will spray thin coat and top coat renders, cementitious repair mortars, external textured wall coatings, fireproofing and intumescent paints, spray mortars and cementitious coatings, tanking and waterproofing renders
With a mortar gun the pumps can be used for mortar pointing and grouting


The STX515 pumps are available with two speed or single speed output and reduction gearboxes with pump outputs up to 10 ltr/min
The standard motor supplied is 110v 1.5kw for site use; also produced with 230v motor for domestic refurb work

 

The three speed STX518 will pump monocouche render

 

APPLICATIONS
• spray application of cements & plasters
• thin coat renders
• fireproofing & intumescent paints
• waterproofing renders & tanking
• exterior textures & high build masonry coatings
• pumping & injecting grouts
• pointing mortars, joint fillers & grouts

Specifications

  • STX515S Pump 1.5kw
  • Hopper tank 60 ltr
  • Pump output 3 ltr/min
  • Height 70cm
  • Air required for gun 280 ltr/min @ 4 bar

  • STX515T Spray Pump 1.5kw
  • Hopper tank 60 ltr
  • Pump output 4/8 ltr/min
  • Height 70cm
  • Air required for gun 280 ltr/min @ 4 bar

  • STX5189T Spray Pump 1.8kw
  • Hopper tank 60 ltr
  • Pump output 4/8/12 ltr/min
  • Height 70cm
  • Air required for gun 280 ltr/min @ 4 bar

  • Download PDF from catalogue

    BUY STX515 & STX518 SCREW PUMPS ONLINE